Danby DBCR031BB31 Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the screw hole covers from the top left
side of the cabinet. Remove the upper hinge
cover, the upper hinge and the hinge washer
from the top right side of the cabinet.
2. Remove the door from the cabinet. Remove the
hinge hole cover from the top left side of the
door. Remove the hinge sleeve from the top right
side of the door. Install the hinge hole cover on
the top right side of the door. Install the hinge
sleeve in the top left side of the door.
3. Remove the adjustable foot and the screws from
the lower left side of the cabinet.
4. Remove the adjustable foot, the lower hinge and
the hinge washer from the bottom right side of
the cabinet.
5. Remove the hinge sleeve and the door stopper
from the bottom right side of the door. Install the
door stopper and the hinge sleeve on the bottom
left side of the door.
6. Install the hinge washer, the lower hinge and
the adjustable foot on the bottom left side of the
cabinet. Install the door on the cabinet. Install
the adjustable foot and screws on the bottom
right side of the cabinet.
7. Install the hinge washer and upper hinge on the
top left side of the cabinet. Install the hinge cover
by sliding it over the hinge. Install the screw hole
covers on the top right side of the cabinet.
1
2
3
4
5
6
7
5