Publicité
Les langues disponibles
Les langues disponibles
Operation
The Vacuum Sealer automatically comes on when plugged in, indicator light will turn green.
The Vacuum Sealer is now ready for use.
Vacuum Packing Food
1.
Place the food inside in the bag and remove any excess liquid or food residue.
2.
Allow minimum of 25mm-50mm of space at the top of bag to ensure a good seal.
3.
Place the open end of the bag across the Sealing Strip, keeping opening within the chamber ring and close lid.
4.
While pressing lid down with thumbs press in locks on both sides of the machine with index fingers.
5.
Press "Vacuum & Seal" button. Indicator light will turn red.
6.
Vacuum pump will engage until required vacuum level is achieved. Machine will automatically go into seal mode.
7.
Indicator light will change orange as the machine starts to seal.
8.
When sealing is complete lid will raise slightly and green light will illuminate.
9.
Remove bag and inspect bag and seal.
(Note: A good seal will look clear upon inspection. If the seal is spotty, incomplete, wrinkled, white or milky, remove sealed
portion and run vacuum and seal process again.)
10.
To abort process, press "Vacuum & Seal" button again. Machine will automatically go into sealing mode.
remove seal and start again.
Using the "Seal Now" Function
1.
Place the open end of the bag across the Sealing Strip, keeping opening within the chamber ring and close lid.
2.
While pressing lid down with thumbs press in locks on both sides of the machine with index fingers.
3.
Press "Seal Now" button.
4.
Indicator light will change orange as the machine starts to seal
5.
When sealing is complete lid will raise slightly and green light will illuminate.
6.
Remove bag and inspect bag and seal.
(Note: A good seal will look clear upon inspection. If the seal is spotty, incomplete, wrinkled, white or milky, remove sealed
portion and run vacuum and seal process again.)
Cleaning, Care & Maintenance
•
Always allow to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the appliance.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
WARNING: Do not allow any water to spill into the appliance when cleaning
.
-4-
When complete,
Publicité
