Tripp-Lite SmartPro SMART2200RM2U Manuel Du Propriétaire page 3

Important Safety Instructions
Circuit Breaker EMI Filter
AC In
Surge Protection
AC Out
USB Com Port
Serial Com Port
Teleprotect Circuit
*If applicable
Equipment Connection Warnings
• Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended.
• Do not connect surge protectors or extension cords to the output of the UPS. This might damage
the UPS and may affect the surge suppressor and UPS warranties.
Battery Warnings
• Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe
proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries.
Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before
performing battery replacement. Use tools with insulated handles. There are no user-serviceable
parts inside the UPS. Battery replacement should be performed only by authorized service
personnel using the same number and type of batteries (Sealed Lead-Acid). The batteries are
recyclable. Refer to your local codes for disposal requirements or visit http://www.tripplite.com/
support/recycling-program for recycling information. Tripp Lite offers a complete line of UPS
System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at http://www.tripplite.
com/products/battery-finder/ to locate the specific replacement battery for your UPS.
• During hot-swap battery replacement, the UPS will not provide backup power in the event of a
blackout or other power interruptions.
• Do not operate the UPS without batteries.
21-07-111-933088-Book.indb 3 21-07-111-933088-Book.indb 3
Cut Relay
Boost 1 Relay
Line Cutoff Relay
LCD Display, Switches
Inverter
Transformer
Charger
Control
3
External Battery
Connector *
+
Internal
Battery
7/28/2021 4:49:35 PM 7/28/2021 4:49:35 PM