Akai STD-2000 Manuel D'utilisation page 81

Troubleshooting
If you have any questions, please consult the following troubleshooting guide
THERE IS NO IMAGE AND NO SOUND
●
Check the ON button is connected
●
Check the socket works
●
Check the power supply cable is not
damaged
●
Check the plug is firmly inserted into the
wall socket
THERE IS IMAGE BUT NO SOUND
●
Check the audio connecti
connected
●
Check the audio key is not damaged
●
Check the volume is activated in the VOL /
CH setup
●
Check you have setup the DVD pl
AUDIO settings correctly
●
Check you have used the correct AV IN
on your television
●
Check the audio is not in silent mode
(MUTE)
THERE IS SOUND BUT NO IMAGE
●
Check the video connecti
connected
●
Check you have used the correct AV IN on
your TV
●
Check the video key is not broken
●
Check you have setup the DVD play
VIDEO settings correctly
DISTORTED IMAGE OR SOUND
●
Check you have setup the DVD pl
AUDIO settings correctly
●
Check the disc in not scratched or stained
●
Check the AV key or the OUT terminal
are not damaged
●
●
●
●
ons are properly
ayer's
●
ons are properly
●
●
er's
●
ayer's
77
THE MESSAGE "BAD DISC" APPEARS
Check the disc is not bent, broken or deformed
Check the disc is not too stained or damaged
Check the disc format is compatible with the
DVD player
Please check if you have attempted to play
software CD. If so, turn the DVD player
THE REMOTE CONTROL DOES
NOT WORK
●
Check the main unit POWER button is
connected
●
Check the remote control batteries are
working
●
Point the remote control directly
the unit's infrared sensor
●
Remove any obstacles between the remote
control and the sensor
THE UNIT DOES NOT WORK
Disconnect the power supply and reconnect
THE MESSAGE "NO DISC" APPEARS
Check that you have placed the disc in the
tray.
Check that the disc is the right way up.
Check that the disc is not deformed, stained
or scratched.
Other
a
towards