Encoding; Reference - Akai STD-2000 Manuel D'utilisation

ENCODING

When a CD is loaded, Press the SUBTITLE button to start to encoding.
● Use the UP and DOWN arrow button to select speed, bitrate a nd
choose the file you need.
● Use UP and DOWN button to select the tracks you want to encode,
Press ENTER button to decide.
● Use LEFT and RIGHT button to the START interface, Press ENTER
button to start encoding.
● When highlighted the CHANGE SPEED, press ENTER button to change
the encoding speed.
Use LEFT and RIGHT button to cancel.

REFERENCE:

1.To protect your DVD player, the interval between turning the
unit on and off, via the Main Power button will take more than
30 seconds.
2.If the unit will not be used for an extended period of time, please
disconnect the power plug from the outlet.
3.The player should only be operated with the correct power supply
that corresponds to the marking label. The incorrect power supply
could damage the unit.
4.The player may not be compatible with some encrypted discs
55