Publicité
Les langues disponibles
Les langues disponibles
Radio Player
instruction Manual
A new karaoke experience, just for you! Light and portable, listen
to and sing your favourite songs. With a radio, it also connects to
memory cards or mp3 players.
im p or ta nt
• Do not repair, alter or disassemble the unit unless absolutely essential.
• Do not immerse it in water or pour water over it.
• Do not put it outdoors, in the bathroom or in damp places.
• Do not position in unsteady or sloping areas or places where it may fall.
• Do not insert small objects into the unit.
• Do not hit against hard objects.
• Do not store in areas that have dust, oil or are smokey or damp.
• Adjust the volume to appropriate level when using the earphones
(if too loud it could damage the ears).
• Do not touch or plug in a DC power adapter with wet hands due to the risk of electical shock.
• Do not use chemical agents such as alcohol or benzene to clean the unit.
1 . c o nt En t s
1.1. player
1.2. connection cable
2 . p oWEr so u r c E
2.1. batteries (not included): (as shown on page 1)
• If the product is not to be use for an extended period of time (30 days or more), turn it off fully and
remove the batteries.
• The product will automatically stop working when the batteries run out. In this case, remove the
batteries.
2.2. With power adapter port (power supply not included) (as shown on page 1)
• Ensure that local voltage matches the power adapter's voltage.
• Use the power adapter with the positive pole towards the plug.
• Connect the power adapter to the player's DC 6 V (800 mA) input and to the wall socket.
• In order to avoid irreparable damage do not use any other type of power adapters with this product.
• The power adapters should be inspected regulary to avoid potential risks such as damage to the
plug, cable or cord, outer case or other parts.
• The toy should not be use if the power adapter is damaged.
• The power adapter is not a toy.
Characteristics of the power adapter:
Input power: AC 100-240 V, 50/60 Hz
Output power: DC 6 V, 800 mA (positive interior and negative exterior)
3 . d E scr ip t i on o f t hE d E V i c E (as shown on page 1)
3.1. screen icons
3.1.1. sd card mode
1. USB
2. Volume
3. Total file and current file number
4. Rotating wheel indicator
5. Music mode
6. Music formate
7. EQ mode
8. Battery capacity
9. Play
10. Pause
11. Elapsed time
12 Mic.
13 Line in
14 SD card
3.1.2. radio mode
1. Volume
2. Channel number
3. Radio mode
4. Battery capacity
5. FM frequency
4 . o p Erat i o ns
The product automatically identifies the connected devices and switches into the relevant mode.
If no device is connected, it will switch on in its default mode, which is the Radio Mode.
4.1. radio mode
Station search:
• Automatic: press button „Radio station search function" (3) to start and store the station search
automatically (frequencies 87-108MHz), and use the same button to stop the search. After the
automatic search, the first FM station will be played.
Press
repeatedly to click through and select any stored station.
• Manual: press
/
repeatedly to search for stations(on pressing the button, it will stop
every 0.1 MHz).
4.2. connection to an external device (mp3, hifi, ...)
• Ensure that the external device works properly.
• Connect the input cable to the external device and to the player. It will automatically change mode.
• To exit this mode, remove the cable.
4.3. connection to a computer
• Switch off the player.
• Insert the SD card.
• Connect the connection cable to the computer and the machine, and the corresponding icon will
display at the right and bottom edge of the window, and LCD screen of the machine will show the
above picture.
• Once connected, you can copy or delete files from the SD card and format it.
• Once the data transfer has finished, remove the connection cable from the computer and from the
player.
note: it is compatible with Windows 98 / 2000 / Xp / Vista / 7
Art.-Nr. 680.0036
3.2. parts/buttons
1. Microphone
2. Volume up/down
3. Automatic station search / setup
(press Scan / Setup for more than
1 second during play Mode)
4. Speakers
5. Selection of SD / USB / FM / VOICE
6. Microphone ON / OFF / REC
7. Next / forward (in radio mode it goes to
the next station)
8. Previous / back (in radio mode it goes to
the previous station)
9. LCD screen
10. On / Off
11. Play / Pause / radio M+ (next stored
station in radio mode)
12. USB port
13. Memory card slot
14. Earphones input
15. Input for external audio signal
16. DC : 6 V input 800 mA
17. Microphone volume
4 . 4.c onnE ct sd ca rd o r u sb :
1. Insert SD card or USB with music files inside.
2. Slide the power switch to ON, the product
will go into SD card or USB run mode and
play music automatically after it completes
initialization.
3. Play / Pause
When playing music, press
to pause
and press it again to resume playing.
4. Previous track / Next track
Press
or
to play previous track or next track.
5. Volume Up/Down
Press volume "UP" / "DOWN" to increase or decrease speaker and headphone output volume.
6. Change EQ mode
a. When playing music in SD card or USB mode, press SCAN / SETUP button to go into EQ
selecting mode, at this moment the current EQ mode flashes (as shown in the right figure).
b. Press
or
button to select EQ mode, press
music in accordance with your select EQ mode.
7. Use of microphone
a. Take down the microphone and press "MIC ON / OFF / REC"
button and LCD screen will show "MIC ON".
b. Aim your mouth at microphone and keep 1-2 cm distance and
rotate MIC VOL knob to proper volume and sing alone with the
music.
c. Recording function: Press Button "MIC ON / OFF / REC" an hold approx. 2 seconds to start
recording function. Press the same button again and hold approx. 2 seconds to stop recording
function. Please note: While using recording function the music will automatically switch off.
d. After use, press "MIC ON / OFF / REC" button, and the "MIC ON" will disappear in the LCD
screen. Then replace the microphone and turn "MC VOLUME" knob to minimum position.
5 .tr ou b lE sho oti ng
If there is any problem, for example the buttons do not work or the screen freezes, turn off the unit,
wait a few seconds and turn back on. If the player works again it can be used as usual.
P RO B LEM
S OLUTION
1. Check that the power adapter is properly connected to the device
and the wall socket.
It does not turn on
2. Check that the batteries have been positioned correctly.
3. Replace empty batteries.
4. Ensure that it has been switched to ON.
1. Adjust the volume.
There is no sound
2. The speaker does not work if earphones are connected.
1. Change the position of the device.
Bad radio signal
2. Turn off nearby electronic equipment.
Music cannot be
1. Check that the USB cable is not damaged or poorly connected.
downloaded
2. Check that there is enough memory available.
properly
3. Check if the driver is compatible with the device.
1. Check that the connection cable is not damaged or poorly
No sound comes
connected.
from external
2. Check that the external device works properly.
devices
3. Check that it is in External Mode.
4. Adjust the volume.
1. Check that they are connected properly.
It does not play
2. Check that they contain music files.
music from the SD
3. Make sure the files are not damaged.
card/USB device
4. Make sure the devices are not damaged.
6 . tE chnical i nfor m atio n
Formats played
USB port
USB capacity supported
SD/MMC capacity supported
Range of FM frequencies
Channel memory
Power source
Earphone output power
Speaker output power
Display
Operating temperature
button again to enter, the unit will play
MP3 / WMA
2.0
128 MB – 8GB
128 MB – 8GB
87 – 108 MHz
20
Batteries: 4 x AA
Power adapter: AC 100 – 240 V, 50/60 MHz,
DC 6 V, 800 mA (positive interior, negative exterior)
< 5 + 5 mW
> 500 mW
LCD
-5°C – 40°C
3
Publicité
