Sony MXP-29 Mode D'emploi page 30

@ EXT MON button
@ osc (oscillator) button
@ PFL (speaker pre-fader listening) button
When this button is depressed, the original input
signal corresponding
the depressed
PFL button of
each channel
will be output from
the MONITOR
connectors € as well as the PHONES jack @ .
When the output signal is monitored with a speaker,
the
PFL signal can
also be monitored
with the
speaker.
@ PHONES jack (stereo phone jack)
Accepts headphones having an impedance of 8 ohms
or more.
@ TALK BACK MIC (microphone)
@ TALK BACK MASTER button
@ TALK BACK AUX 1, 2 buttons
While one of these buttons is depressed, the output
from the built-in microphone is fed to the AUX 1 or 2
connector. The output to the MONITOR L, R connectors
@® are automatically muted.
@ TALK BACK TB OUT button
@ TB LEVEL control
Adjusts the built-in microphone sound level.
@® PHONES control
Adjusts the level of the headphones connected to the
PHONES jack.
@® MONITOR SELECT switch
Selects the output signal to be monitored.
MASTER: line outputs
AUX 1: auxiliary 1 output
AUX 2: auxiliary 2 output
- When the PFL button of each channel or the EXT
MON button is depressed, the pre-fader signal or
the signal connected to the EXT MON
connectors
@
is selected independent of the setting of this
selector.
@ MONITOR LEVEL contro!
Adjusts th output level of the MONITOR connectors.
The gain margin at the maximum
setting is 10 dB.
@ EDITOR CONTROL indicator
Lights when
the unit is controlled
by the external
equipment such as editing contro! unit BVE-900.
@ TB connector (phono jack)
1-11(E)