Publicité
Les langues disponibles
Les langues disponibles
3
prior to first use
Before using the appliance for the first time, proceed as follows: carefully unpack the appliance and
remove all packaging material and any promotional stickers. Keep the packaging (plastic bags, polystyrene
and cardboard) out of reach of children. After unpacking the appliance, carefully check it for external damage
that may have occurred during transport. Place the appliance on a sturdy, flat surface and make sure there is sufficient
space
around it for sufficient ventilation. A minimum space of 5 cm is required between the appliance and the surrounding walls.
In this way the appliance is able to release heat properly, cool well and function in an energy efficient way.
• You can use the adjustable feet to the left and right to level the appliance.
• Turn the adjustable feet clockwise to lower the appliance.
• Turn the adjustable feet counter-clockwise to raise the appliance.
Do not place the appliance near heat sources such as central heating or a stove. Do take note of the climate class of the
appliance. When placed in a room that is too cold, the freezer will not function properly.
After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance
to dry for 1 to 2 hours
Installing the door handle
Dimensions and free surrounding space
• Maintain sufficient room at the front to be able to open the door.
• Allow at least 10 mm of space on all sides.
Caution: This freezer is not an appliance that can be built in.
.
24
•
English
F
I
F
F
I
A 550
B
594
C
1683
F
D min=50
E
min=50
F
G
840
A 550
H
150
B
594
1683
I
115°
C
D min=50
E
min=50
F
10
G
840
H
150
I
115°
10
Publicité
