Publicité
Les langues disponibles
Les langues disponibles
English
Assembly and Installation
Accessories Include
1. Main window panel and extension panels
- extends from 20" up to 46"................. 3 pieces
2: EXNDOUS NOZIO aria
l piece
E
munies
E
its 8 pieces
4. Exhaust hose <s yez vea geai
nr
ne 1 piece
Ds CONS niet
ess 1 piece
A
ar A E EEEE
2 pieces
7. Hose connector
EE
ets 1 piece
1)Connect the 3 pieces of the window panels by sliding the 2 extension panels
into the main window panel.
2)Apply a foam strip to the end of each extension panel.
3)Open the window and place the window panel assembly into the window.
Adjust the extension panels to fit the width or height of the window as shown
below (see figure A). Secure the extension panels using 4 blunt tip screws
(see figure B-1). Secure the main window panel using 4 pointed screws (see
figure B-2 and B-3).
A)Expand the 2 ends of the exhaust hose. Connect the hose connector to one
end of the exhaust hose by turning clockwise. Then insert the exhaust nozzle
at the other end of the exhaust hose by turning clockwise (see figure C) to
create the hose assembly.
5)Slide the hose connector end (the square end) of the hose assembly into the
rear of the unit (see figure D).
6]Insert the exhaust hose with nozzle end into the window panel(see figure E).
7)Plug the power cord into the wall outlet and press the "Reset" button.
8)Please allow 8" of space around the unit for proper air circulation.
9)When removing the portable air conditioner for storage, the window panel
may be left in place. Simply place the cover over the nozzle hole (see figure
A).
d) c=
Screws À
Publicité
