Miele CarClean Set Vario Mode D'emploi page 64

UV
CarClean Set Plus
(see illustrations on pages 2, 4, and 5)
The accessories in the Miele CarClean
Set Plus should only be used with Miele
vacuum cleaner models S 227 - S 858
and the S 4000 and S 5000 series.
If your vacuum cleaner is fitted with
connection A (see below) you can use
the hose of the CarClean set, otherwise
an adapter must be used.
– Adapter B:
for S 4000 and S 5000 series.
– Adapter C:
for any other Miele vacuum cleaner.
^ Connect adapter, B or C, to the
CarClean Set hose, until it clicks. Pay
attention to the correct positioning
(see illustration).
64
CarClean Set Vario
(see illustrations on pages 2, 3 and 5)
The Miele CarClean Set Vario has been
designed as an accessory for
non-Miele canister vacuum cleaners.
The enclosed adapter, f, is required to
connect the accessories to non-Miele
canister vacuum cleaners.
Accessories
a Micro hose with combination nozzle
(crevice nozzle and dusting brush)
b Hand Turbobrush
c Crevice nozzle (12 in. / 300 mm)
d + e Suction hose (9.8 ft / 3 m) with
hose holder and connection (only in-
cluded with the CarClean Set Plus)
f Accessory adapter (only included
with the CarClean Set Vario)
Connecting the suction hose d
^ Fit the latch ring or the adapter into
the suction socket of your vacuum
cleaner (illustrations g to i).
^ To disconnect the hose from the va-
cuum cleaner, press the release but-
tons (illustrations j to l) and pull
the latch ring or adapter out of the
suction socket.