tomado TWM9001W Mode D'emploi page 50

Description
Abnormal noise
ERROR CODE TABLE
Description Possible cause
Water injecting problem during the wash cycle
Water overflow
Overtime water draining
The door is not closed properly
Others
• CUSTOMER SERVICE
Spare parts for your appliance are available for a minimum of 10 years.
In case of questions, please contact the customer service.
WARNING!
Risk of electric shock
• Never try to repair an appliance which is defective or presumed to be defective. You may put your own and future users'
lives in danger. Only authorised specialists are allowed to carry out this repair work.
• Improper repair will void the warranty and subsequent damages can't be recognized!
TRANSPORT
IMPORTANT STEPS WHEN MOVING THE APPLIANCE
• Unplug the appliance and close the water tap.
• Check, if the door and the dispenser tray are closed properly.
• Remove the water supply hose and the water discharge hose from the house installations.
• Let the water drain completely from the appliance.
• IMPORTANT: Re-install the 4 transport bolts in the back of the appliance.
• The appliance is heavy. Transport with care. Never hold any protruding part of the appliance when lifting.
The door of the appliance cannot be used as a handle.
• TECHNICAL SPECIFICATIONS
Model
Washing capacity
Power supply
Rated power
MAX. current
Standard water pressure
Dimension (WxDxH in mm)
Nett weight
Possible cause
The transport bolts are still in place.
The floor is not solid or level
TWM9001W
9.0 kg
220-240V~, 50Hz
2000 W
10A
0.05 MPa - 1 MPa
595 x 565 x 850
71 kg
EN - 50
What to do?
Check if the transport bolts have
been removed.
Make sure the appliance is installed on
a solid and level floor.
What to do?
Check if the water pressure is high enough.
Straighten the water supply hose.
Clean the inlet filter.
Restart the appliance.
Check the water discharge hose for blockage.
Close the door properly and restart.
Restart the appliance. If the problem persists,
please contact the customer service.