tomado TWM9001W Mode D'emploi page 29

 P lease read these instructions before operating
the appliance and retain for future use.
 P lease, do not use the washing machine without reading
the instructions for use first.
• Check for any damage to the packaging or the appliance during
transportation. Never use a damaged appliance, but contact
your supplier.
• Failure to observe the instructions for use or inapproriate use
of the appliance may result in damage to the laundry or the
appliance, or injury to the user. Keep the instruction manual
handy, near the appliance.
INSTALLATION LOCATION AND SURROUNDING
• Keep the appliance clear from heat sources and direct sunlight to
avoid plastic and rubber parts to corrode.
• Do not install the appliance in a room where the temperature can
drop below 5°C, as the parts of the appliance may be damaged in
case of water freezing.
Do not install the appliance in humid environments or rooms
containing explosive or caustic gas. In case of water leakage or
water splashes let the appliance dry in the open air.
• Never use flammable sprays or substances in the immediate
proximity of the appliance.
INSTALLATION
• Place the appliance on a level and stable solid (concrete) base.
• Adjust the appliances adjustable feet to ensure the appliance is
standing level and balanced.
• Before the first use of the appliance, remove the transport bolts,
as switching on a blocked appliance can result in serious damage.
The manufacturer will not be responsible for any damage in cases
of such damage.
• Before connecting the appliance to the power mains, wait for at
least 2 hours until it reaches room temperature.
• The door cannot be opened during washing machine operation.
SAFETY INSTRUCTIONS - EN
EN - 29