Westinghouse QR072 Manuel De L'utilisateur page 14

Maintenance
REPLACING FILTER
When filter need replacing, exchange with similar. Also replace
filter that is damaged with punctures, bends, or broken frame.
- Turn off the range hood and disconnect the power .
- Replace with an equivalent filter, then reconnect the
power .
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 40W E26 base
light bulb .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Remove the light cover .
- Turn the bulb counter-clockwise and pull it out to remove it.
- Push in the new bulb and turn it clockwise . Do not
release the bulb until you are sure the bulb has been
securely installed . Then reconnect the power .
- Put the light cover back in place .
- If new bulbs do not operate, ensure that they are
inserted correctly .
QR072 / QR074
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
will increase the risk of fire.
WARNING:
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
14 14
Failure to replace worn out or damaged filters
Light bulbs can become hot when turned on .