Intellinet Network Solutions 561167-V3 Instructions page 3

Connections
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Use the included power cable to connect the receptacle on the back of
the switch to a power outlet, and confirm that the Power LED lights.
• Cat5e/6/6a/8.x UTP/STP cables provide optimal performance;
if a status LED doesn't indicate a link or activity, check the
corresponding device for proper setup and operation.
LED Color
PWR Green
SYS
Green
Link/Act/Speed
10/100M: Orange;
1–8
1000M: Green
PoE
Orange
1–8
9 – 10
Green
(SFPs)
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address
field. The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the serial number on the bottom of the switch. Click OK.
Status
On Unit is receiving power.
Off
Blinking
Off
On
Blinking Data transmitted/received.
Off
On The connected powered device (PD) is receiving power.
Blinking Abnormal power supply.
Off
On
Blinking Data transmitted/received.
Off
Instructions
Description
Check connection.
System is normal.
System not started.
Valid port connection.
No link established.
No PD device is linked.
Valid port connection.
No link established.
English 3