Publicité
Les langues disponibles
Les langues disponibles
•
Ensure that the battery is fully charge.
•
Avoid storing the device in extremely hot or cold environments.
•
If the device will not be used for a long time, remove the battery before storing it.
•
Batteries and chargers must be placed in a secure location prevent heat, dust and moisture from
entering.
•
Batteries should be stored in a dry environment.
Recommended storage temperatures:
• The battery and flammable matter must be kept at least 5-feet apart.
• In order to ensure the service life of the equipment and to prevent its degradation, it must be stored
with enough battery power.
• When not in use, charge the battery at least once every 4 months.
17. Tool indications and warning signals
17.1. Charge level indication
To determine your pruner battery charge level your pruner is supplied with a simple to read
LED readout.
When the green light is illuminated then your battery is suitable for operation. Depending on
operating variables such as diameter of cut, density of wood and frequency of the cuts a typical
battery charge will last 3 hours.
When the red light is blinking then you should charge the battery as soon as possible.
17.2. Warning tone of batteries
Have your power tool serviced by a qualified repair person using only identical parts for replacement.
This will ensure the safety of the power tool.
36
Storage less than 1 month
Storage less than 6 month
Storage over 6 month
LED
Green
Orange
Red
Red blinking light
-20°C ~ +60°C
-10°C ~ +35°C
0°C ~ +30°C
Charge level
100% – 60%
60% – 20%
20% – 10%
Less than 10%
Publicité
