ADEO SCREEN XTR3 Manuel D'installation Et D'utilisation page 53

INSTALLATION SCREEN
5
PREPARE THE FABRIC FOR THE INSTLLATION, insert the round bars in the pockets.
5
INSTALLL THE BLACK BACKING FABRIC IF PRESENT
5
INSTALLL THE FABRIC, SEQUENCE SHOWN ON BELOW DIAGRAM.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: XTR3 – Installation Manual rev3 | 27.10.2020
Fix the springs on the round bar
for every triangular hole.
Page 53