Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND MAINTENANCE
CAUTION
Before cleaning, turn off all valves, including gas supply valve, and allow unit to cool to room temperature.
Note: Use
only
non-abrasive
appearance and making it susceptible to
cleaners/sanitizers containing chlorine,
stainless steel
and
glass material and shorten
scrub by rubbing only in
Initial
Cleaning
-
Prior
Prior to operating your new griddle, thoroughly wash the griddle surface and the exterior with a mild detergent
or soap solution. Do not use abrasive cleaners since this might damage the cabinet finish. If the stainless steel
surfaces become discolored, scrub by rubbing only in the direction of the finished grain.
Daily Cleaning
1. After each use, clean the griddle with wire brush or flexible spatula.
2. Clean the griddle surface thoroughly. If necessary, use a griddle stone, wire brush or
the
surface.
3.
After cleaning griddle surface, coat with cooking oil to prevent rusting.
4. Remove
the
5.
Clean
stainless
6. Once a day, thoroughly
Weekly Cleaning
1. Clean unit
soft, dry cloth. A mild
2. To remove the drip pan,
3. Burner air shutter openings must be kept clean. Main burner ports must be kept clean. Clean burners
with a stiff brush.
WARNING
A qualified service technician must handle all maintenance and repair.
CAUTION
For your safety and to ensure proper operation, only use service and repair parts purchased from the
manufacturer. If you have any questions or problems contact you nearest Service Representative. All burner
control valves must be checked and lubricated periodically by a qualified service technician.
cleaners. Abrasive cleaners could scratch the
dirt
iodine, ammonia
the
direction of
the finished
to first operation.
Rub in the direction of the grain of the
grease pan,
empty
it and wash
steel
or chromed surfaces with a damp cloth and polish
clean
splash back, sides and front.
thoroughly.
Clean
stainless
detergent
pull
by handle through
accumulation. Do not use steel
or
bromine
the
life
of
the unit. If the
grain.
metal.
it
with a mild detergent.
steel
or chromed surfaces
may be used. To remove
the
opening
Page 12
finish of
your
wool,
other
chemicals as
these will deteriorate
stainless
steel
surfaces
with
a soft, dry cloth.
with
a damp cloth and polish
discolorations,
use a non-abrasive cleaner.
in
the front panel.
unit,
marring
its
abrasive cleaners or
the
become discolored,
steel
wool
on
with
a
Publicité
