Publicité
coupler, electric shock risk or tripping over of child.
3.3.2 When you connect the power connector with the appliance, open th
along with the arrowhead pointed direction,pay attention to the direction.
3.3.1 The user should use the bought power coupler as showed in the figure. The
•
The user should use the bought power coupler as showed in the figure. The coupler should match with the appliance and
coupler should match with the appliance and earthing prolong. The coupler should
earthing prolong. The coupler should be VDE approved. The length of the power cord can be more than 1.8 m but less
be VDE approved. The length of the power cord can be more than 1.8m but less
than 3 m, if the power cord is too long and heavy, it can cause the fall off the coupler, electric shock risk or tripping over of
than 3m, if the power cord is too long and heavy, it can cause the fall off the
child.
coupler, electric shock risk or tripping over of child.
•
When you connect the power connector with the appliance, open the lid along with the arrowhead pointed direction,pay
3.3.2 When you connect the power connector with the appliance, open the lid
attention to the direction.
along with the arrowhead pointed direction,pay attention to the direction.
3.4 After use shut down the appliance firstly, pull out the plug, then put o
position pin and remove the coupler.
Figure2
4. Description of Control Panel
After use shut down the appliance firstly, pull out the plug, then put off the position pin and remove the coupler.
After use shut down the appliance firstly, pull out the plug, then put off the
BGP1307-150-19G
position pin and remove the coupler.
4 Description of control panel
4. Description of Control Panel
IFH03-220
•
Left knob: Selector with heat setting
•
Right knob: Thermostat dial
5 Using instructions
4.1 Left Knob: selector with heat setting
4.2 Right Knob: Thermostat dial
4.1 Left Knob: selector with heat setting
1. Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and
flammable objects.
4.2 Right Knob: Thermostat dial
5. Special safety regulations
2. Connect the fan heater to the mains.
5.1 Before use, please check the marking on the power cord. Depending on the
3. Set the thermostat knob to the MAX and let the heater operate with full power.
power cord type this appliance may be used in different ambient conditions
4. The fan heater will switch on when the heating selector is set to one of the power settings.
Type
5. Special safety regulations
You can use the appliance in
5. Once the room reaches the required temperature, heating element will stop working, fan keep working. Once the
H07RN-F
household, warehouses and
5.1 Before use, please check the marking on the power cord. Depending
temperature decreased, the heating element will be working. The fan heater now starts and stops automatically and thus
workshops, building sites or
keeps the room temperature constant.
greenhouses
power cord type this appliance may be used in different ambient conditio
6. Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan position, let the appliance
H05RN-F
household, warehouses and
Type
cool down for two minutes then turn off the heater and pull out the plug.
workshops or greenhouses
H05RR-F
household, warehouses and
7. There is an additional thermostat to control the fan motor. If the temperature inside heater is high, the thermostat will also
H07RN-F
workshops
turn on the fan motor despite that the heater is turned off. For example, after operation, when the heater is turn off, the fan
motor will still operate to cool down the temperature inside.
5.2 When using electrical appliance basic precautions should always be followed
6 Cleaning and maintenance
H05RN-F
1. Before cleaning the appliance, disconnect it from the socket and let it cool down. The enclosure is easily to get dirty, wipe
it often with soft sponge. For every dirty parts, wipe with a sponge dipped in <50°C water and mild detergent, then dry
H05RR-F
the heater enclosure with clean cloth. Be careful not to let the water enter the appliance inner. Don't splash water onto the
heater, never use solvent like gasoline etc. to clean the heater, in order to protect the enclosure.
2. Clean the cord and plug, dry and pack it in a plastic bag.
3. When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in a packing box and
5.2 When using electrical appliance basic precautions should always be
store it in a dry, ventilated place.
including below:
5.2.1 The fan heater is not suitable for use outdoors in damp weather, in
bathrooms or in other wet or damp environments.
5.2.2 Please note that the fan heater can become very hot and should, th
be placed at a safe distance from flammable objects such as furniture, cu
Figure2
IFH03-300
Do not use in
building sites
You can use the appliance in
building sites or greenhouses
household, warehouses and
workshops, building sites or
greenhouses
3
household, warehouses and
workshops or greenhouses
household, warehouses and
workshops
BGP1307-300-19G
3
12
M1.1.WEL30.NLFREN - 11062020
Do not use in
building sites
building sites or gre
EN
Publicité
