Publicité
M1.1.WEL30.NLFREN - 11062020
EN
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
2 Introduction
It incorporates a thermostat and a
•
Depending on the power cord type this fan heater may be used only in household, warehouses and workshops, building
thermal cut-out to control the heating elements. The thermostat feels the air
sites or greenhouses depending. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating
temperature and controls the surrounding temperature.
elements. The thermostat feels the air temperature and controls the surrounding temperature. The fan motor is controlled by
resetting)
thermostat will switch off the heater by overheating to ensure the
thermostat and it stops working when the thermostat cuts off the heating element, and the self-resetting thermal cut-out will
safety.The fan motor is not controlled by thermostat, when the thermostat cuts off
switch off the heater to ensure the safety when overheating.
the heating element the ventilator keeps working on.
•
When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after
2.2 When using the heater for the first time, you may notice a slight emission of
a short time. The heating element is made of stainless steel and was coated with protection oil by production. The smoke is
smoke. This is quite normal and it stops after a short time. The heating element is
caused by the left oil when heated.
made of stainless steel and was coated with protection oil by production. The
smoke is caused by the left oil when heated.
3 Technical specifications
3. Technical specifications
Model
Model
Waterproof class
Waterproof Class
Voltage
Voltage
required power
Required power
current
Current
Required Fuse
Setting
Setting
Reset thermostat
Product dimensions
Reset thermostat
Net weight
Product meas (mm)
N.W.( KG)
•
Housing of steel plate and coated by heat-resistant powder.
•
Supplied with industrial socket installed in the heater. Need additional coupler when use the heater.
3.1 Housing of steel plate and coated by heat-resistant powder .
•
Instructions of coupler:
3.2 Supplied with industrial socket installed in the heater. Need additional
coupler when use the heater.
3.3
Instructions of coupler:
1. Five pins connector 380V/415V 50/60Hz
Figure 1
2. Power cord
1. Five pins connector 380V/415V 50/60Hz
3. Five pins plug 380V/415V 50/60 Hz IPX4
2. Power cord
3. Five pins plug 380V/415V 50/60Hz IPX4
manual resetting (self-resetting for IFH03-300)
IFH03-220
IFH03-300
WEL30
IPX4
IPX4
~
400V 3
400V 3
3 x 400 V
22000W
30000W
30 kW
31.8A
43.3A
43.3 A
35A
120 / 20000 / 30000 W
145/11000/22000W
70/15000/30000W
85 °C
140°C (manual
433 x 709 x 614 mm
95°C(self-reset)
reset)
31 kg
430X430X600
485X350X665
19.2
2
Manual reset (or self
IPX4
~
45A
24.5
11
Publicité
