Publicité
Les langues disponibles
Les langues disponibles
- The blender is equipped with a safety switch, meaning that the blender jar must be placed correctly on the main unit,
otherwise the blender will not work. NEVER remove the blender jar during operation, as this can cause very dangerous
situations.
- The blender is equipped with an overheat safety, meaning that if the blender is used for too long, a safety will
automatically switch off the blender, to prevent the motor from overheating. If this happens, wait for 30 min. until the
motor has cooled off. In some cases, this might take longer, i.e. a high ambient temperature, hard ingredients being
used,...
- If very hard ingredients are being used (or big chunks),the appliance might block. In that case, unplug the blender,
remove the hard and/or big chunks and replug the appliance.
- If the appliance doesn't work, bring it back to your point of sale for servicing. Attention: please check first if the safety
function has switched off the appliance, i.e. overheating, incorrect assembly, blockage caused by big/hard chunks.
- Always make sure to assemble the appliance correctly for your own safety.
- Always place the appliance on a stable surface, like a kitchen table so that the appliance cannot shift or fall.
- NEVER pull the cord to unplug the appliance, only use the plug.
- NEVER open the appliance and NEVER put strange objects in the appliance.
- Do not use aggressive cleaning products.
- Repairs can only be done by a recognized repair shop.
2. TECHNICAL INFORMATION
- You will find the technical information on the rating label at the bottom of the appliance.
- Use the appliance for a maximum time of 10 minutes at the time.
3. BEFORE THE FIRST USE
-
Remove all packaging and stickers.
-
Keep packaging away from children.
-
First check your appliances for possible damages. If it is damaged, do NOT use the appliance but bring it back to your
sales point.
-
Before the first use we recommend to clean all components thoroughly (see 5. 'Cleaning').
-
All parts should be dry!
-
Ensure that the voltage marked on the appliance is the same as your main voltage
4. USE OF THE HIGH EFFICIENCY BLENDER
- With the high efficiency blender from FRITEL you can blend fruit, vegetables, ice, nuts, soups, milkshakes, mashed
potatoes,....
- The appliance is not meant to be used for blending hard objects such as wood, bones, cans, or other non-food items.
- Thanks to the plastic jug (BPA-free), hot liquids can be used. However, we always recommend filling the blender slightly
less full.
- The max. capacity of the blender jar is 2 L. Do not exceed the max. level marked on the jar.
- NEVER plug in the appliance if the blender jar is empty.
- Rotating button "0" means Power off, "program" means standby mode. The speed is adjustable between the 1 and 10.
- 3 function buttons: "ice crusch", "interval (pulse)", "smoothie (juice)". To select these functions, turn the rotating button
to "Program" and press the selected function, i.e; "smoothie (juice)".
- Make sure the blender is always correctly assembled, otherwise the blender will not work. This is for your own safety.
- An additional safety is built into the lid so that the blender will not work if the lid is not fully fitted.
- Do not use too hard or too big chunks. This could block the blades.
5. MAINTENANCE AND CLEANING
- Switch off the appliance and remove the plug from the socket.
- Clean the blender jug with water without detergents.
- Clean the main unit with a dry cloth, do not use water or a damp cloth.
- NEVER immerge the motor housing in water or any other liquid.
- Tip: After use, add some lukewarm water to the blender jar, let it work for about 10 sec. and rinse it.
13
Publicité
