Kenmore ELITE HE3t Manuel Du Propriétaire Et Instructions D'installation page 17

Preset cycle settings of Wash/Rinse Temp, Spin Speed, and Soil Level can be changed. You can change a modifier after starting a cycle
anytime before the selected modifier begins. Not all Modifiers are available with all options and cycles.
Wash/Rinse Temp
MODIFIERS Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
/_u_o T_ C0N_ROL garment label instructions.
o EXTRA H OT/COLD• HIGH Warm rinses leave the loads drier than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
• HOT/COLD • MEDIUM more comfortable to handle. Cold rinses save energy.
® WARM / WARM • LOW
• WARM / COLD ® EXTRA LOW o 2ND RINSE
O COLD / COLD • NO SPIN ® NORMAL RINSE
,f _,,
WATER TEMP SPIN SPEED RINSE
wp,,s_i/ _/I_SE
OPTIONS
To change the water temperature, select the WATER TEMP
button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
• HEAVY
• NORMAL
• LIGHT
SOIL LEVEL
•
To change cycle time, select SOIL LEVEL button.
2nd Rinse
A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse. This is
the default rinse setting for the Whitest Whites cycle.
Normal Rinse
Consists of a two phase rinsing process that is effective for
everyday laundry.
Temperature Guide
Wash Water Temperature Suggested Fabrics
EXTRA HOT Sturdy colorfast fabrics,
Heavy soils
HOT Whites and pastels
Heavy soils
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
In wash water temperatures colder than 60°F (15.6°C), detergents
do not dissolve well. Soils may be difficult to remove.
Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned On when a cycle is
selected. (See "Preset cycle settings" in "Cycles.")
• ATC works for the wash temperature with Extra Hot/Cold,
Hot/Cold, Warm/Warm, Warm/Cold, and Cold/Cold settings.
• ATC works for the rinse temperature with the Warm/Warm
setting.
• The Cold rinse temperatures depend on the cold water at
your faucet.
£
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available within each of
these washer cycles.
CYCLE SUGGESTED LOAD TYPE PREWASN RINSE EXTENDED
OPTIONS SPIN
Whitest Whites Soiled white fabrics _' v' v'
Heavy Duty Sturdy, colorfast fabrics and heavily soiled garments _' v' v'
Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of polyester, _' v' v'
nylon, cotton, linen, or cotton blends
Sanitary Heavily soiled underwear, towels, work clothes, diapers, etc. _' v' v'
Nandwash/ Curtains and delicate clothing. Special-care items labeled v'
Delicate "handwashable."
17