STOWAWAY PUMP HANDLE
Pull
up
WAND CLIP
The wand can be
attached to the
pump handle
using the wand
clip.
INSTALLING THE SHOULDER STRAP
The backpack strap is provided with multiple features
including shoulder strap, chest strap, waist belt, lumbar
support and back pad (figure 1). The top of both the shoulder
straps and back pad straps are attached to the top of the tank
and are removable. The back pad strap attaches to the bottom
of the tank (figure 2). The back pad is attached to its strap with
velcro and is removable ( figure3). The strap from the lumbar
support attaches to the base tube on the bottom of the tank
(figure 4).
In the event that the sprayer harness (straps) become
contaminated with chemicals, it is recommended to
thoroughly wash the straps with soap & water and allow to dry
before using the sprayer.
Figure 2
Back Pad strap attachment
Rotate
180º
Removable
Back Pad
Back Pad
Strap
Velcro
Attachment
Figure 3
Removable Back Pad
4E
Set
into
slot
Figure 1
Strap Assembly
Figure 4
Strap Attachment
Shoulder
Strap
Back
Pad
Chest Strap
Lumbar
Support
Waist Belt
Lumbar
Support
Base Tube