Publicité
(1) Plug one side of the USB cable into bottom of scanner and plug the other side into
How to transmit data via USB Cable?
your device.
(2) Setup keyboard language: US keyboard was set by default. If you use other type of
keyboard please refer to Keyboard language.
When you connect scanner with your device via USB cable, USB HID-KBW feature will
USB HID-KBW
be enabled by default. Scanner's transmission will be simulated as USB key-board
input. It works on a Plug and Play basis and no driver is required.
When you connect scanner with your device via USB cable, by scanning "USB COM
USB COM Port Emulation
Port Emulation" will allow your device to receive data in the way as a serial port does.
Note: A driver is required for this feature.
%#IFSN0$1
*Wireless Transmit
$USB#KEY
*USB HID-KBW
$USB#COM
USB COM Port Emulation
(2)
Publicité
