Vonyx AM Serie Manuel D'instructions page 4

11. SEND / EFFECT
Press the button to send effect signal to the channels.
12. REPEAT
This is used for adjusting frequency of echo repeat. Since too much
echo repeat may cause a howl , please adjust frequency properly.
13. MP3/AUX VOL
Volume control for AUX input, MP3 via USB or SD.
14. STEREO GRAPHIC EQUALIZER
2X5-band equalizer is provided for tone control over each
frequency, and for precise high quality sound by final tone control.
15. OUTPUT MAIN FADER (LEFT/RIGHT)
This is a master fader for adjustment for volume of left / rig he
output.
16. EFFECT LEVEL
Using by this control, you can adjust signal level of echo repeat &
external effect.
17. DSP
Press the button to select an effect.
18. OUTPUTS LEVEL INDICATOR
Displays the signal of output.
19. PHANTOM POWER SWITCH
This switch toggles phantom power on and off. When the switch is on the mixer supplies
+48V phantom power to all channels that have XLR input jacks. Turn this switch on
when using one or more phantom-powered condenser microphones.
20. HEADPHONE LEVEL
Volume control for signal level of headphones.
21. PFL
With the PFL-switch, you can route an input channel to the headphone section
22. HEADPHONE JACK
6.3mm (¼") input jack for connecting a headphone.
4