Publicité
Les langues disponibles
Les langues disponibles
EN
12
4.
Put the one angle regulator screw (17) into the screw hole. Use Allen key to
partially tighten the screws in place and firmly tighten them.
16
16
5.
Push the angle regulator caps over the screw hole.
6.
Repeat the process to install the other backrest and angle regulator.
5. OPERATION
5.1. ADJUST THE SEAT HEIGHT
To lower the seat:
1.
Sit on the chair.
2.
Pull up the height adjustment lever and the seat will slowly lower.
3.
Release the lever when you have reached the desired height.
To raise the seat:
1.
Get up from the chair.
2.
Pull up the height adjustment lever and the seat will rise.
3.
Release the lever when you have reached the desired height.
14
15
17 11
6
12
15
14
11 17 16
16
Publicité
