LENCO LPJ-700BKGY Mode D'emploi page 19

Connect USB Device And Micro SD Card
"TF"
Follow below picture to connect a USB stick and Micro SD card.
Turn off the projector before connecting the USB/Micro SD card.
Using a Micro SD Card or USB Stick
Connect USB/Micro SD device:
1. Turn off the unit before connecting USB/Micro SD card.
2. Connect the USB device to the USB port.
3. After connecting, press the
power indicator light up GREEN.
4. Press the /SOURCE button to enter and use the
MEDIAPLAYER mode.
5. After selection, use the
icon and press the
select Micro SD card or USB and press the
6. Use the buttons to search the correct file and press the
preview playback file and press the
remote to start playback.
7. Press
8. Press
9. During playback, press the
NOTE: Remove USB/Micro SD card device, press the
power FIRST.
button to turn on the projector and the
buttons to search the MUSIC/PHOTO/MOVIE
button to enter, if necessary, use the
button to search forwards and backwards quickly.
button to search next or previous file.
button to pause and press again to resume.
button to enter.
button of unit or
18
buttons to search the
button to
button to
button of
button to turn off