BH FITNESS G815BM Instructions De Montage Et Utilisation page 12

2 Keep your hands well away from any of the moving
parts.
3 Parents and/or those responsible for children should
always take their curious nature into account and how this
can often lead to hazardous situations and behaviour
resulting in accidents. This unit does not have to be used
in any case like toy.
4 The owner is responsible for ensuring that anyone who
uses the machine is duly informed about the necessary
precautions.
5 Your unit can only be used by one person at a time.
6 Use suitable clothing and footwear. tie up your shoelace
correctly.
ASSEMBLY INSTRUCTIONS.-
ATTENTION: The assistance of a second person is
recommended when assembling this machine.
It is advisable to retighten these screws after one
month of using the machine.
1. Take the unit out of its box and make sure that all of the
pieces are there:
Fig.1 Parts list
(1) Main body.
(155) Bottom post cover left.
(155-1) Bottom post cover right.
(97) Main post.
(49) Front stabiliser bar with wheels.
(59) Rear stabiliser bar with adjustable feet.
(108) Bottom focus bar, left.
(107) Bottom focus bar, right.
(129) Pedal left foot.
(130) Pedal right foot.
(110) Left focus bar or arm.
(111) Right focus bar or arm.
(169) Monitor.
(220) Bottle holder.
(154) Footrest.
(221) Transformer.
(63) Bottom cover.
(146) Left crankshaft joint cover.
(147) Right crankshaft joint cover.
(150) Focus bars rotation lock rear covers.
(151) Focus bars rotation lock front covers
(152) Focus bars bottom lock left covers.
(153) Focus bars bottom lock right covers.
(222) Bottle holder suport
Fig.2 Screws and fasteners
(123) Washers 29x26x0,35.
(157) Screws M-4x15.
(156) Screws M-5x15
(158) Screws M-5x10
(101) Washers M-10.
(100) Self locking nuts M-10.
(122) Self locking nuts M-8.
(132) Self locking nuts M-12.
(139) Screws M-12x40.
(119) Screws M-8x15.
(120) Washers 30x9x2.
(159) Washers M6.
(89) Screws M-8x15.
(66) Spring washer M-10.
(90) Washers 25x9x2.
(125) Screws M4xP0,7X10
(230) Washers D6xD13x1.0t
(231) Spring washer D6
(232) Screws M6xP1.0x15
(176) Screws M5xP0.8X12
(167) Screws D4x10
(140) Screws M6x1,0x10
(91) Curved washer BK.
(98) Screws M-10x70.
(99) Screws M-8x15.
(67) Washers M-10.
(68) Screws M-4x15.
(89) Screws M-8x15.
(121) Screws M-8x45
(51) Cap nut M-8.
(65) Screws M-10x40.
(160) Screws M-5x10.
(166) Screws D4x12.
(161) Screws M-6x15.
(162) Washers M-6.
Allen key 8mm.
Allen key 10mm.
Allen key 6mm.
Allen key 5mm.
Ended ring spanner 19mm.
Double ended ring spanner 10-13.
2. FITTING THE STABILISER BARS.-
Bring the front stabiliser bar with wheels (49) to the main
body (1) positioning the wheels at the front of the unit,
Fig.3, and self locking nuts (51), and tighten securely.
Carry out the same operation to attach the rear stabiliser
bar.
Take the rear stabiliser with adjustable feet (59), and line
up the dots, Fig.4. Insert the screws (65), fit the washers
(67) and spring washer (66), and tighten securely.
Next, fit the rear trim cover (63) (145) and tighten using
screws (68) (160), Fig.5.
3. FITTING THE FOOT BARS.-
Fit the spacer washers (91) as shown in Fig.6.
Then fit take the left foot (129) (marked with the letter "L")
and insert the end bush onto the drive spindle (E) on the
main body (1) Fig.6.
Insert screw (89), as shown in Fig.6, then fit the flat
washer (90),(91) and tighten securely.
Take the right foot bar (130), (marked with the letter "R")
and go through the same assembly procedure as with the
left.
Next, fit the rear trim cover (86) (87) and tighten using
screws (88), Fig.6A.
12
MOD. G815BM