Nicols PAR LED 129 FC Manuel D'utilisation page 10

Power input: AC 230V/50Hz
Polished housing,
Double brackets
DMX mode, M/S, auto run, built-in programs, sound active mode
LED display for easier operation
Thermal protection
Ultra brightness and perfect color mixing
Unique cooling system
3. Working modes
3.1 Built-in program mode
Press MODE button. Enter built-in program menu "Pr.××".Press UP or DOWN button. Select
effects program from Pr.01~Pr.10. When LED display show Pr.01,press SETUP button enter
the static color ,press UP or DOWN button ,you can select 7 static colors on the built-in
program (1.-r;2.rg;3.-g;4.gb;5.-b;6.-rb;7.-rgb)
Press SETUP again ,you can press UP or DOWN adjust the brightness of the static
colors .Press SETUP button again to setup the flash "FSxx"of the color .Also press UP or
DOWN to adjust the speed of flash.
When LED display show Pr.02- Pr.10,the first time press SETUP button ,it will show
"SP.XX",now you can press UP and DOWN button to setup the speed of running from
SP01~SP100(FL).The second time press SETUP button ,it will show "FSxx",now you can
press UP and DOWN to setup the speed of the flash from FS00~FS99.
3.2 Auto running mode
Press MODE button ,to enter auto run mode "AUTO", it will auto run 9 built-in programs from
Pr.02~Pr.10.The user can setup the running speed, flash speed with mode Pr.02~Pr.10 .The
setting up effects will be auto run in order.
3.3 DMX mode
Press MODE button ,enter DMX mode menu "d.×××"
Press UP or DOWN BUTTON to setup DMX value from d.001—d.512
Press SETUP button. Enter setup DMX mode menu X-ch.
Press UP or DOWN button to set up DMX mode,3ch, 4ch, 8ch
9-