Publicité
Les langues disponibles
Les langues disponibles
Quick Start cont.
Tilt and Swivel
Grasp both sides of the monitor screen
with your hands and adjust the tilt and
swivel as desired (Figure TS.1).
Remove Monitor Stand for
Mounting
To prepare the monitor for alternate
mounting purposes:
1. Disconnect all cables.
2. Place hands on each side of the monitor screen and raise it to the
maximum height (Figure R.1).
3. Place monitor face down on a non-abrasive surface. (Place the screen
on a 2-inch platform so that the stand is parallel with the surface.)
(Figure S.1)
4. Remove cable cover. Remove the 4 screws connecting the monitor to the
stand and lift off the stand assembly (Figure S.2). The monitor is now
ready for mounting in an alternate manner.
5. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting
method.
78133314
40mm
Figure S.1
4
3
2
1
Figure S.2
7
9
Figure TS.1
2/8/99, 10:14 AM
Publicité
