Publicité
Les langues disponibles
Les langues disponibles
Controls
Auto Adjust
AUTO
MultiSync
Automatically adjust the Image Position, the H. Size or Fine setting.
MultiSync LCD
Automatically adjust the Image Position or the H. Size setting.
Position Controls
H. POSITION
Controls Horizontal Image Position within the display area of the LCD.
V. POSITION
Controls Vertical Image Position within the display area of the LCD.
AUTO
AUTO
Automatically sets the Horizontal and Vertical Image Position within
the display area of the LCD.
Image Adjust Controls
H. SIZE
Adjusts the horizontal size by increasing or decreasing this setting.
FINE
Improves focus, clarity and image stability by increasing or decreas-
ing this setting.
NOTE: The Image Adjust Fine control must be used to complete the
MultiSync LCD
Automatically adjusts the H Size or Fine setting.
MultiSync LCD
Automatically adjusts the H Size setting.
AccuColor
Five color presets select the desired color setting. Each color setting is
adjusted at the factory.
R,G,B: Increases or decreases Red, Green or Blue color depending
upon which is selected. The change in color will appear on screen
and the direction (increase or decrease) will be shown by the bars.
Tools
OSM H POS.
OSM V POS.
You can choose where you would like the OSM
appear on your screen. Selecting OSM Location allows you to manually
adjust the position of the OSM control menu left, right, up or down.
ALL RESET
Selecting ALL RESET allows you to reset all OSM control settings back
to the factory settings. Individual settings can be reset by highlighting
the control to be used and pressing the RESET button.
78133314
cont.ols
LCD
/LCD
®
™
1510
™
monitor only
2010
setup of your MultiSync
/LCD
™
1510
monitor only
2010
™
Control System
11
monitor only
™
1510V
®
LCD
™
monitor.
2010
monitor only
™
1510V
™
9
2/8/99, 10:15 AM
control window to
Publicité
