Publicité
Les langues disponibles
Les langues disponibles
(4)
EasyJob button
for saving, opening and deleting EasyJobs.
The LED in the button indicates that EasyJob is selected
How it works:
-
-
-
(5)
Welding process button
for selecting the welding process
-
-
-
-
-
-
(6)
Mode button
for selecting the operating mode
2-step mode
4-step mode
Depending on the function package, various special opera-
ting modes can be selected. Press the button to see the
available operating modes shown on the display one after
the other
(7)
Adjusting dial with turn/press function
-
-
(8)
Intermediate arc indicator
a spatter-prone intermediate arc occurs between the short arc
and the spray arc. The intermediate arc indicator lights up to draw
attention to this critical area.
Press and hold the button for 3 seconds = save Easy-
Job (all current settings are saved). After saving, the
LED in the button lights up and 'Store' is shown on
the display
Press and hold the button for 5 seconds = delete Ea-
syJob. 'Store' is shown on the display after 3 seconds,
'Clear' is shown after 5 seconds and the LED in the
button goes out
Press the button = select the saved EasyJob
PULS SYNERGIC - MIG/MAG pulse synergic welding
SYNERGIC - MIG/MAG standard synergic welding
MANUAL - MIG/MAG standard manual welding
JOB - Job Mode
STICK/TIG - Manual metal arc welding, TIG welding
SP (SP = special programs: LSC, PMC, etc.) - Depen-
ding on which package of functions is enabled, various
welding processes can be selected. Press the button to
see the available welding processes shown on the dis-
play one after the other
for changing the material thickness, current, wire feed
speed and special function parameters
for selecting and changing parameters in the Setup
menu
39
Publicité
