MAJORITY TOWERS TOW-DVD-BLK Guide D'instructions page 9

Instructions Guide
Getting Started
Setting Up
Connect the power plug of the DVD player to a wall outlet.
The power indicator on the front panel will illuminate red.
Press the On/O on the front panel or the Remote Control
to start the DVD player. The power indicator on the front
panel will illuminate green.
Follow the below guidance for cable connections to get
your DVD player set up:
Cable Connections
1a. Connect a RCA cable between the Video, Left and Right
Output on the back panel of the DVD player to the RCA
input on your TV.
1b. Connect a HDMI cable between the HDMI Output on
the back panel of the DVD player to the HDMI input on
your TV.
2. If you have a stereo ampli er, connect a coaxial cable
between the Coaxial Ouput on the back panel of the DVD
player to the coaxial input on your stereo.
3. Control the playback via the buttons of the Remote
Control.
7