Publicité
Les langues disponibles
Les langues disponibles
3.2.1
Power supply
3.2.2
Installation
Building Technologies
Fire Safety & Security Products
All manuals and user guides at all-guides.com
The power supply is connected via a special modular connector and cable assem-
bly. This has a free end with connections for plus (+) and minus (-) for connection
to a suitable power source.
We recommend that the InfoPoint be powered from a battery-backed power supply
(in the access control system) via a junction box connected to the door controller.
If a local power supply is to be used, we recommend a PSU with filtered DC output
(12 or 24V DC).
Fig. 4
Rear view of InfoPoint
A
Power supply input (modular type connector).
B
Supplied cable with modular type connector and with a free end. Length 3 metres.
C
+
Polarity
= 24V,
D
Standard TCP/IP LAN connection, 10BaseT connector. Type RJ45.
E
Standard Cat-5 cable for LAN connection
F
Reserved for external unit.
WARNING
The unit includes high-voltage driven components.
= 0V.
Installation
11
06.2009
Publicité
