Publicité
Les langues disponibles
Les langues disponibles
en-us Installation and connection
Align refrigerator compartment doors
Align the vertical gap of the doors:
Remove the contents from the doors, if
Note:
present.
Remove the screw T20 and cover cap on the
1.
door hinge.
8
Loosen the safety screw.
2.
9
CAUTION
Do not remove the safety screw.
Turn the adjustment screw until the desired
3.
position is reached when the door is closed.
– To move the upper end of the door outwards,
turn clockwise.
– To move the upper end of the door inwards,
turn counterclockwise.
To check the position, close the door and correct
4.
if necessary.
Tighten the safety screw again.
5.
Fit the cover cap and screw in the screw T20
6.
again.
Publicité
