Zephyr Monsoon Mini AK9128BS Guide D'utilisation, D'entretien Et D'installation page 20

Maintenance
Removing Hybrid Baffle Filters
1. Push in on spring loaded filter handle.
2. Pull down on filter handle to remove filter.
Replacing Hybrid Baffle Filters
Hood Model
AK9128BS
AK9134BS
To order parts, visit us online at http://store.zephyronline.com.
LumiLight LED
In the unlikely event that your LumiLight LED fails, please contact Zephyr to order replacement parts.
See the list of parts and accessories page for part numbers and contact information.
LED Removal (FIG. G):
1. Remove hybrid baffle filters.
2. Remove side panels if applicable, and remove
light panels by two screws each.
3. Disconnect LED light quick connector.
4. Push in the two side clips on the ends of the
LED light.
5. Push LED light through the light panel opening.
20
Part Number
50210041
50210041
Monsoon Mini Use, Care, and Installation Guide
M O N S O O N M I N I
I N S E R T
Qty. to Order
2
2
Push the clip
FIG. G
C O R E