Publicité
Les langues disponibles
Les langues disponibles
Main parts (image A)
Status indicator LED
1
Camera lens
2
Microphone
3
Reset button
4
MicroSD card slot
5
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Unplug the product from the power source and other equipment if problems
occur.
• Do not unplug the product by pulling on the cable. Always grasp the plug and
pull.
• Consult the local laws and regulations for this product before installing and
using.
Preparing the security camera
Use an SD card with a minimum of 8 GB and a maximum of 128 GB.
4
1. Insert the new microSD card into the microSD card slot A
2. Connect the USB cable A
3. Connect A
to the USB power adapter.
q
4. Connect the USB power adapter to a power outlet to charge the camera.
The product switches on automatically.
6
7
8
9
q
to the micro USB port A
q
5
Speaker
Micro USB port
USB power adapter
Reset pin
Micro USB cable
.
5
7
.
Publicité
