Télécharger Imprimer la page

Gigabyte BRIX GB-BNIP-N100 Guide De Démarrage Rapide page 26

Publicité

3-2
Installing the M.2 SSD
M.2 SSD: Installation der M.2 2280 SSD / SSD M.2 : Comment installer le SSD M.2 2280 / SSD M.2: Como
instalar el SSD M.2 2280 / M.2 SSD: Como instalar o M.2 2280 SSD / SSD M.2: Come installare l'SSD M.2
2280 / M.2 SSD: Установка модуля M.2 2280 SSD / M.2 SSD: Instalacja dysku SSD M.2 2280 / M.2 SSD: M.2
2280 SSD nasıl Yüklenir / M.2 SSD:M.2 2280 SSD 安裝方式 / M.2 SSD:如何安装 M.2 2280 SSD /
M.2 SSD:M.2 2280 SSDのインストール方法 / M.2 SSD: M.2 2280 SSD 설치 방법
WARNING!
Failure to properly turn off the system before you start installing components may cause serious
damage.
Follow these instructions to Install the M.2 SSD:
1.
Remove both the small screw secured to the M.2 SSD screw hole.
取下 M.2 SSD 插槽螺絲孔上的螺絲。)
(
2.
Carefully insert the M.2 SSD into slot.
小心地把 M.2 SSD 裝入 插槽。)
(
3.
Insert the tab on the thermal plate into the slit near the connector, then secure the thermal plate and M.2
SSD in place with the previously removed screw.
把散熱片裝入插槽旁邊的缺口,然後用之前取下的螺絲將 M.2 SSD 與散熱片固定。)
(
NOTE!
The illustrations of the M.2 SSD/Heatsink installation shown are for reference only.
Please follow the installation steps of actual purchased.
注意! 安裝 M.2 SSD / 散熱片 圖示僅參考,請依照實際購買的 M.2 SSD / 散熱片安裝步驟說明。
1
3
System Hardware Installation
- 26 -
2

Publicité

loading

Ce manuel est également adapté pour:

Brix gb-bnip-n200Brix gb-bni3-n305