AVer MD120UI Mode D'emploi page 38

Language
Reset
System Reboot
Status OSD
Power Up to Preset
Power Off to Preset
Setting
Trigger OSD
Camera Selector
System Log Download
Help Us Improve
Change the web interface language.
Reset the camera to factory default settings.
Restart your camera.
Enable to display preset status on the HDMI output during functions
such as saving, loading and canceling presets.
When enabled, the camera will move to the defined position after
powering on.
 Click the toggle to turn on > enter a preset number > click Save.
 Make sure the preset number has been defined before enabling
this function.
When enabled, the camera will move to the defined position before
powering off.
 Click the toggle to turn on > enter a preset number > click Save.
 Make sure the preset number has been defined before enabling
this function.
Import or export your camera settings.
Select how the OSD menu is opened with the remote control.
Assign a number to your camera that corresponds to the Camera
Select buttons on the remote control. When All Channel is selected, no
selection is required on the remote control to operate your camera
Click to download system log.
Opt-in or opt-out of providing anonymous usage data.
30