Télécharger Imprimer la page

Stanley TIMEIT TM203 Mode D'emploi page 2

Publicité

INITIAL USE:
Install the cord and unit at least 5ft (1.5m) above ground
level with the outlet receptacle facing downward.
Let the switch hang downward so moisture doesn't
accumulate in the outlet. Plug the lights or appliances
into the outlets at the bottom.
USO INICIAL:
Instale el cable y la unidad por lo menos 5ft (1.5m) por
encima del nivel del suelo con el receptáculo de salida
hacia abajo. Deje el interruptor cuelgue hacia abajo
para que la humedad no se acumule en la toma de
corriente. Conecte las luces o aparatos a los enchufes
de la parte inferior.
PREMIÈRE UTILISATION:
Installer le cordon et l'appareil à au moins 5ft (1.5m)
au dessus du niveau du sol avec la sortie du réceptacle
aurientée vers le bas. Laissez l'interrupteur pendre vers
le bas pour éviter l'accumulation d'humidité dans la
sortie. Branchez les lumières ou les appareils dans les
prises au fond.
ITEM / ARTICULO / ARTICLE# 31213 | 56454

Publicité

loading