Télécharger Imprimer la page

Danby DBC044C1SSDB-6 Manuel Du Propriétaire page 5

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS
CONTROL PANEL
1. Light button: press to turn the interior light on or
off.
2. Display: shows the set temperature.
3. Up and down buttons:
• Use to set the desired temperature. Each
press will increase or decrease the set
temperature in 1° increments.
• Press and hold the up and down buttons for
3 seconds to change the temperature scale
between Celsius and Fahrenheit.
Notes:
• Touch the control panel lightly to engage the
keys.
• To avoid scratching the control panel, do not
touch it with sharp objects.
• Actual temperature inside the appliance can
vary based on ambient temperature, the
quantity of items stored and how frequently the
door is opened.
• If the appliance loses power, it will resume the
previous set temperature once power is restored.
LEVELING INSTRUCTIONS
There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level. If the appliance is not
level, the door may not close or seal properly which
can cause the appliance to malfunction.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the cabinet.
2. Slowly turn the leveling leg clockwise until the
appliance is level.
STOCKING INSTRUCTIONS
To maintain good air circulation inside the
appliance, do not allow beverages to touch the back
wall of the cabinet.
This beverage center has a maximum capacity of
160, 355 ml cans. To achieve this capacity, place
28 cans on the top shelf, 36 cans on the 3 middle
shelves and 24 cans in the bottom compartment.
This beverage center can also be confi gured to hold
126 480 ml cans by removing one of the shelves.
To achieve this capacity, place 30 cans on the top
shelf, 36 cans on the 2 middle shelves and 24 cans
in the bottom compartment.
SHELF INSTRUCTIONS
To remove a shelf from its locked position, lift the
rear of the shelf upward and then slide the shelf out
of the appliance.
To replace the shelf, ensure it is resting securely on
the support brackets and then push inward until the
shelf locks into place.
4

Publicité

loading