Publicité
Mounting on a concrete wall
The awnings must be installed at least at the thickness of 10cm only on a
reinforced concrete wall. If the wall shows cracks you have to consult a
professional.
The maximum load for the non-retractable parts of the awning ：680N
Tools Recommended:Chopping bit Ø10mm
HARDWARE:
Storage
When it is unused for a long time, it is suggested to take the awning out of the mounting
bracket, and properly store it.
Before storage, ensure that the tarpaulin is completely dry, so as to prevent mildew and
adhesion, and prevent permanent fatigue of waterproof adhesive tape in bending, and
extend the service life of awning
Attention! At least Three healthy adults are needed for this step.
Remove the awning by above step of mounting instructions in reversed order.
Retract the awning completely.
Store the awning in a dry and safe place away from children.
Maintenance
Maintenance can extend the service life of the awning.
Check whether the bolts are loose once a month; please tighten if loose bolts and nuts are
found
If it is damaged or not properly tightened, please immediately stop using the Pergola
awning
Clean once a month to keep the appearance clean
After cleaning the tarpaulin, check the tightness of the fabric.
Under normal circumstances, awning does not need lubrication. If there is abnormal noise
or hard contraction, please use plastic lubricant, and do not use petroleum-based
lubricant.
Avoid leaving frozen ice on awning, or it is easy to damage the sunshade cloth and cause
needless loss.
If problems occur in the process of using, please contact the authorized center for
inspection and maintenance.
Wind resistance class
The awning is rated Wind Class 1 when firmly anchored with the correct mounting material
and must be retracted immediately at wind speeds of 28 km/h and above.
Wind Class 1
Speed 20-28 km/h = 5.5-7.9 m/s.
Disposal:
The same as the installation steps; three adults with professional skills are needed; the
disassembly is opposite to the installation.
At the end of your item's long service life, please dispose of the valuable raw materials
properly so that proper recycling can take place. If you are not sure how best to proceed,
the local waste disposal companies or recycling centre will be happy to help.
10
Publicité
