Publicité
Les langues disponibles
Les langues disponibles
9133430
4.
Connect the vertical supports using 2 of the
long shelf braces (C) (Fig. 3).
a.
Make sure the attachment is proper and
secure (Fig. 4).
K:\Packaging\ARTWORK\9133430_PF\IMAGES5.
Insert a corner bracket (F) above the
second short shelf brace position on each of the
4 vertical supports (Fig. 5).
a.
A rubber hammer or mallet is
recommended for this step to avoid denting
or other damage.
6.
Attach the remaining long and short shelf braces
at the desired positions.
7.
Locate the middle shelf brackets (E) and attach them
across the middle of each set of long shelf braces
(Fig. 6).
a.
Make sure the attachment is proper and secure
(Fig. 7).
8.
Place the MDF (A) shelves onto the completed
shelving unit (Fig. 8)
9.
Place the remaining 4 feet on the top of the vertical supports.
10. Ensure that all connections are proper and secure.
11. Carefully move the shelving unit to the desired location.
12. If possible, affix the shelving unit to a wall using appropriate hardware (not
included).
6
4-Shelf Steel Shelving Unit
Fig. 6
For technical questions call 1-800-665-8685
Fig. 7
V4.1
Fig. 3
Fig. 4
Fig. 5
Fig. 8
Publicité
