Publicité
Les langues disponibles
Les langues disponibles
V4.1
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the Identification Key are included.
IDENTIFICATION KEY
A
MDF shelving board (4)
B
Vertical support (8)
C
Long shelf brace (8)
D
Short shelf brace (8)
E
Middle shelf brace (4)
F
Corner bracket (4)
G
Foot (8)
ASSEMBLY &
INSTALLATION
Letter references in parenthesis (A) refer to the
included Identification Key.
1.
Take 2 of the vertical supports (B) and connect
them at the lowest possible position with 1 of the
short shelf braces (D) (Fig. 1).
2.
Install a second short shelf brace at the desired
position (Fig. 1).
3.
Place 4 of the feet (G) on the bottom of the 4
vertical supports (Fig. 2).
Visit www.princessauto.com for more information
4-Shelf Steel Shelving Unit
9133430
Fig. 1
Fig. 2
5
Publicité
