Publicité
Les langues disponibles
Les langues disponibles
DOCUMENT SYMBOLS
I ndicates additional information that is NOT related
to physical injury.
IMPORTANT SAFETY INFORMATION
This manual has safety information and instructions to help
you eliminate or reduce the risk of accidents and injuries.
A.
Recognize Safety Information
T his is the safety alert symbol. It is used to
alert you to potential physical injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
B.
Understand Signal Words
A signal word will identify safety messages and
property damage messages, and will indicate the
degree or level of hazard seriousness.
indicates a hazardous situation that,
if NOT avoided, could result in death or serious in-
jury.
indicates a hazardous situation that,
if NOT avoided, could result in minor or moderate
injury.
is used to address practices NOT
related to physical injury.
GENERAL INFORMATION
A.
Scope Of Delivery
(1) Inside Lock Unit
(1) Outside Lock Unit
(1) Horizontal Gasket, Outside
(1) Vertical Gasket, Outside
(1) Inside Gasket
(1) Template
(1) Screw (M6 - 1 x 46 mm)
(1) Screw (M6 - 1 x 56 mm)
(2) Plug
(3) Key
I ndicates step-by-step instructions.
C.
Supplemental Directives
R ead and follow all safety information and
instructions to avoid possible injury or death.
Read and understand these instructions be-
fore [installing / using / servicing / performing
maintenance on] this product.
Incorrect [installation / operation / servicing /
maintaining] of this product can lead to seri-
ous injury. Follow all instructions.
The installation MUST comply with all ap-
plicable local and national codes.
D.
General Safety Messages
Failure to obey the following warn-
ings could result in death or serious injury:
● This product MUST be [installed / serviced] by a
qualified service technician.
● Do NOT modify this product in any way. Modifica-
tion can be extremely hazardous.
● The security door lock MUST be mounted to an
RV wall in a location without obstacles (wires,
pipes, etc.). It is the responsibility of the installer
to contact the RV dealer or manufacturer to obtain
wire and pipe locations.
B.
Required Tools
●
Pencil
●
Power Drill
●
1/4" Drill Bit
●
1/2" Drill Bit
●
#3 Phillips screwdriver
●
Sealant
C.
RV Requirements
DM-4718 security door lock is designed for RVs
with wall thickness of 1-1/4" to 1-3/8" (32 - 35 mm).
For wall thickness other than those listed, installer
must acquire suitable length mounting screws.
2
Publicité
