Texi ART AUTO Mode D'emploi page 36

7. Information about basic errors
EN TEXI ART AUTO operation manual
All manuals and user guides at all-guides.com
36
1. E402
Problem with plug or cable connecting foot control
(pedal) with control box.
Check all plugs and cables.
If the problem persists, contact the service.
2. E502
Low level of oil.
Add oil to the machine.
In the new machine apply approx. 200 ml.
If error is still shown on the panel, add 50-80 ml more.
Warning: too much of oil can result in leakage problem.
Warning: please be careful while applying oil, and don't
spill oil on the machine head, which can cause damage
of the display.
3. E501
Safety switch code.
Error will be shown when machine head is tilted back.