Texi ART AUTO Mode D'emploi page 35

All manuals and user guides at all-guides.com
6. Applying grease
1. Turn the power switch to "OFF".
2. Remove the screws.
3. Apply grease to each of the holes until the grease over-
flows slightly.
4. Tighten the screws.
5. Turn the machine pulley by hand to move needle bar up
and down several times in order to disperse the grease.
6. Use a cloth to wipe away any excess grease.
7. Add grease after approx. 500 hours or when it is need-
ed.
35
EN TEXI ART AUTO operation manual