Orbegozo OL 4035 Manuel D'instructions page 13

OL 4035
surface.
remain hot during or after use.
• Do not operate the device connected
to an external timer or a separate
remote control system.
• Read carefully all the remarks and
recommendations.
• Do not touch any hot surfaces. USE
THE SIDE HANDLES of the device's feet
as these are heat resistant.
• To prevent electric shocks, make sure
that the thermostat, the power cord
and the device are totally dry.
• Steps for turning on the device:
o FIRST:
firmly as far as it will go into
the socket in the device's body,
leaving the temperature indicator
set to "0".
o SECOND: insert the power cord plug
into the mains socket.
• When
plugging
device´s
never pull on the cord but on the
plug or thermostat.
All manuals and user guides at all-guides.com
CAUTION:
Insert
and
power cord
The surface
the thermostat
unplugging
and thermostat
can
the
13