Special Accessories; Remote Control; Remote Diagnostic System (Fds); Room Climate Control Station - Pco WPM 2006 plus Notice De Montage Et De Mise En Service

Extended Installation Instructions for the Heat Pump Manager (Heating/Cooling)

13 Special Accessories

13.1 Remote Control

A remote control adds convenience and is available as a special
accessory. Operation and menu navigation are identical to that of
the heat pump manager. However, additional functions can be
used by means of supplementary pushbuttons (for a detailed
description, see remote control instructions). The connection is
via a 6-core telephone cable (special accessory) with western
plugs.

13.2 Remote Diagnostic System (FDS)

The remote diagnostic system (FDS) was developed to enable
access to the heat pump manager via PC. In combination with an
"Internet-compatible" PC and the separately available hardware
packages, the software enables the user settings to be read out
and changed as required. The software is programmed to allow
a constant exchange of data between the heat pump manager
and the PC. Changes are possible both on the heat pump
manager and in the program.
The software is started via an Internet browser on the PC and is
optimized for the Windows 2000 and XP operating systems.

13.3 Room Climate Control Station

With cooling using panel heating/cooling systems, regulation is
carried out according to the room temperature and humidity
measured by the room climate control station.
This is done by setting the desired room temperature on the heat
pump manager. The minimum
temperature is calculated from the room temperature and
humidity measured in the reference room. The control response
of the cooling is influenced by the currently measured room
temperature and the set room set temperature.
possible cooling water
NOTE
In the case of heating controllers with removable operating elements (see
Chap. 3.2.2 on p. 5), the operating element can also be directly used as a
remote control.
Two versions are available:
Remote diagnostics locally (e.g. with laptop): Local
Diagnostic System (LDS). Direct connection of the PC cable
via the LDS hardware package to the heat pump manager
(WPM).
Remote diagnostics via modem connection: Remote
Diagnostic System (RDS). RDS is a useful tool for checking
the operation of a remotely located plant and for adjusting
the user settings on the heat pump manager.
Fig. 13.1: Room Climate Control Station
13.3
E-37