CLAS PE 6002T Mode D'emploi page 31

PE 6002T PE 6001
SCISSOR LIFT 3T DUAL CYLINDERS LOW RAISE DOUBLE SCISSOR LIFT 3T
DESCRIPTION OF THE LIFT
How to use:
The lift is designed to lift any type of vehicle with a weight below 3000 kg and it is suitable to be
used for vehicle testing, maintenance and car cares. It is suitable for recessed or floor installation,
without the need for special structures.
Structure Features:
Scissor structured, equipped with holes for anchoring on the ground.
The structure is designed to occupy as little space as possible.
Low voltage independent control unit, with excellent safety level.
Hydraulic Replacement
Equipped with hydraulic safety lock.
Equipped with safety valve and anti-theft system to prevent from overload or from the default
of the hydraulic system, in this way if the oil pump crashes, the lift platforms do not descend
suddenly.
Equipped with a lowering system of the platforms by the use of a manual pump for those
situations of absence of electric current.
Equipment:
complete P1 platform
complete P2 platform
control unit
Frame:
The lift has to be installed on a concrete or cement floor.
Control unit:
Under the control box there are located the oil tank, the hydraulic pump, the oil valve and some
other control systems device.
The electrical system is in the line of the control box.
Scissor lift is designed and built to lift all kinds of vehicles, all other use are unauthorized.
In particular, the lift is not suitable for:
washing cars
lifting personnel
crushing purpose
lifting vehicles whose weight exceed the maximum weight allowed by the producer.
31