Publicité
Les langues disponibles
Les langues disponibles
DRAWER INSTALLATION
1. P lace the drawer adjacent to the wall or cabinet opening.Plug the power supply cord into the electrical outlet.
2. Care fully guide the drawer into the prepared opening. Avoid pinching the cord between the oven and the wall.
3. Slide the drawer all the way until the moun ting
flange is flush with the face of the cabinet.
See Figure 5.
4. Open the drawer. Using the 4 holes on
the drawer as a template , pre drill the cab inet
using a 1/16" bit. See Figure 5.
5. Secure the drawer with the 4 screws supplied .
See Figure 6.
MODEL AND SERIAL NUMBER LOCATION
The
rating
label is the back of the microwave oven.
CARE,CLEANING AND MAINTENANCE
Refer to the Operation Manual for cleaning instructions.
Figure 5
Mounting flange
Screws
4 Sc rews
4 Screws
Figure 6
EN-4
Publicité
